Top Mount Barn Door Hardware Kit - Quality China Suppliers & Factory for Stylish Door Solutions
A Kit Built Around Upper-Edge Attachment
Two short upright hangers with horizontal feet define this package. Each foot sits across the door’s upper edge, establishing the attachment position above the decorative face. The exposed wheels and rail remain visible as a compact architectural detail.
The overview also displays rail stops, mounting spacers, screws, anchors, an adjustment key, circular retainers and a lower guide. These fittings serve different positions within the assembly; the smaller accessories should be considered alongside the prominent rollers when planning a purchase.
Use the illustration to discuss the package you need. The order specification should identify the rail format and accessory quantities for that selection. The pictured fixings do not establish suitability for every wall substrate.
Check the Hanger Footprint Before Preparing the Door
The reference drawing marks an overall height of 117 mm and a base length of 100 mm. Both figures are taken from the supplied illustration and remain unverified. They are preliminary references, not drilling or manufacturing dimensions.
For a top-fixing design, the footprint deserves as much attention as the wheel. Ask for the approved drawing showing the foot width, fixing-hole centres, screw requirements and required overhead clearance. The door’s upper member must provide appropriate structural attachment beneath those holes.
Decorative cladding, an applied cap or a thin veneer does not establish that structural suitability. For a framed or composite leaf, have the door maker identify the reinforcement at the proposed attachment positions. No wheel diameter is specified on this page.
Look at the Rolling Interface
The close-up draws attention to the wheel groove and surrounding bracket. It is a roller reference from a different hanger style; its wraparound bracket should not be mistaken for the top-fixing shape in the kit overview.
When assessing the selected roller, consider how its running profile engages with the matching rail. After assembly, check the entire opening and closing stroke for rubbing, uneven resistance or interference. The lower guide and end positions also influence how the leaf behaves in use.
A still image cannot demonstrate operating sound or automatic deceleration. Soft-close equipment should be specified separately if required; it is not established by this close-up.
Coordinate the Exposed Metal Finish
The material reference identifies carbon steel and a textured black powder finish. This dark, lightly grained surface provides a defined outline beside pale timber and can coordinate with nearby black handles, lighting fittings and shelving frames.
As with the roller detail, the curved strap pictured here belongs to the reference hanger. The top-mount package uses the short upright and horizontal foot shown in the first two images.
For sample approval, compare the coating texture and sheen across the exposed metalwork. Review the actual selected components under the intended room lighting, particularly when matching existing ironmongery. Agree the appearance before placing a repeat or bulk order.
Leave the Door Face Visually Open
The installed view explains the aesthetic advantage: the fixing feet rest above the timber, leaving the upper face unobstructed by long metal straps. Grain patterns and framed joinery remain easy to read across the front.
This approach is worth considering for a pantry entrance beside timber cabinetry, a dressing-area opening with a continuous finish, or a study entrance where the leaf forms part of the room’s decoration. Slatted and patterned fronts may also benefit visually, provided their underlying frame accepts the attachment.
Plan the surrounding space as part of the design. Architraves, handles, adjacent cabinetry and ceiling details can affect the available travel or clearance. The application photograph illustrates the relationship between the fittings and the door; it does not establish compatibility with every decorative leaf.
Select the Attachment Position Deliberately
| Selection Point | Face-Mounted Arrangement | Top-Mounted Arrangement |
|---|---|---|
| Fixing location | Through the front of the leaf | Into its upper edge |
| Visible detailing | Long straps and bolt heads across the face | Short hangers positioned above the leaf |
| Door assessment | Suitable reinforcement behind the front fixings | Suitable reinforcement beneath the hanger feet |
| Design emphasis | Exposed ironmongery as a decorative feature | Greater continuity across the door surface |
This product listing concerns the top-mounted selection. The comparison presents an alternative attachment style; it does not mean that both hanger types are supplied together.
Here, “top mount” describes the connection to the door. The illustrated running rail is supported from the wall, rather than suspended from the ceiling. Changing from one hanger style to another requires a fresh compatibility check, not merely exchanging the visible brackets.
Size the Rail Around the Required Travel
The supplied rail chart provides the following planning references. Confirm their availability and suitability for the chosen top-mount package before ordering.
| Reference Rail Length | Wall Attachment Positions | Door-Width Limit Shown in Chart |
|---|---|---|
| 1500 mm | 4 | 750 mm |
| 1830 mm | 4 | 900 mm |
| 2000 mm | 5 | 1000 mm |
| 2440 mm | 6 | 1200 mm |
Panel width and clear opening width are different measurements. Allow for the intended overlap when closed, the distance needed to uncover the opening, and uninterrupted wall space along the travel path. Stop placement and local obstructions must be considered when checking the proposed layout.
The chart treats a single leaf individually and paired leaves by their combined width. A paired-door proposal still needs its own layout and component selection; the table alone does not confirm a double-door kit.
Discuss Your Door with Oaksun
Share a front elevation and an upper-edge detail, together with the leaf measurements, mass, opening dimensions and intended opening direction. Include photographs of any nearby trim or furniture, plus the number of sets and delivery location.
Oaksun can then review the proposed top-fixing arrangement and prepare a quotation for the agreed package. Resolve the hanger drawing and door construction before machining the leaf.
Frequently Asked Questions
Send Inquiry
When you are keen on any of our products, please feel free to contact with us. You can reach us out via phone, email and SNS etc., we will response to you as soon as possible.









